Furniture Factory - for sale

FACTORY DEPARTMENTS
Furniture Factory
Photo Machinery
FACTORY DEPARTMENTS
- PRODUCTS -
This page is still under development........ and will soon be completed ..... many new Photos will be added
It will also be added a description and Photos to every Factory Department
 
FACTORY DEPARTMENTS
As an example, the different Production Departments in a Furniture Factory.
The Factory Layout is as an example.
The different Machines and Equipments will be shown where they normally will be placed.
But every Factory have its own system depending of the Buildings and kind of Production.
The letter inside (x)  refer to the Factory Layout.
  1. Incoming material - Raw-material storage - Cross-cutting (A)
  2. Packing - Shipping  (B)
  3. Sawing (C)
  4. Milling (C)
  5. Planing (C)
  6. Sanding - Polish (D)
  7. Drilling - Piercing (E) 
  8. Veneer & Laminate Assembly (F)
  9. Gluing - Assembly (F)
  10. Wood Dryers (G)
  11. Spray Finishing (H) 
  12. Drying Room (after Spraying) (H)
  13. Lacquer-Polish (I)
  14. Stock - Semimanufactures
  15. Store of Tools and Components (J)
  16. Office - Workshop Management and Quality Control (K)
  17. Technical Service and Repair Center (N)
  18. Compressed air (O)
  19. Means of Transport
  20. Cleaning - Others

 

The 3-digit (999) numbers refer to the number of the Photo. (000) = no Photo.

  1. Incoming material - Raw-material storage - Cross-cutting (A)
    035  Cross-cut saw Waco. include material table with heavy steel rolls
    000  Dust Collector - Complete System for woodworking machines
    061  Lift table(Scissor lift), high-capacity 3 ton
     
  2. Packing - Shipping  (B)
    015  Heater for CrimpFolie
    000  Packing material
     
  3. Sawing - Cutting  (C)
    037  Cleave-saw Waco 
    038  Adjust saw  0 - 45 angle of inclination
    039  Double adjust-saw, 2.500 mm 0 - 45 angle of inclination
    040  Adjust saw with scribe, 2.800 mm  0 - 45 angle of inclination
    043  Band-saw Ejca
    044  Heavy Duty Precision Re Saw Machine. Varnamo Band-saw 800 mm
    045a Heavy Duty Precision Re Saw Machine. Jonsereds Band-saw 800 mm  Adjustable table
    000  Bandsaw Blades in large selection
    000  Circular Saw Blades in large selection
    000  Dust Collector - Complete System for woodworking machines
     
  4. Milling (C)
    016  Spindle Moulder FM-PA, Jonsered, incl. Tap carriage, Feeding Unit and different Spindle
    017  Spindle Moulder FM-PA-Z, Jonsered
    018  Tap carriage for Milling Machine
    019  SCM R9 Heavy Duty Vertical Overarm Pin Pouter
    028  Double Tap Moulder Schwabediessen, with Calibrated chains
    055  Edge Milling Machine HolzHer, with feeding unit
    058  Sink-machine, Stenberg
    305  Bauerle Spindle Moulder - can do everything 
    331  Feed Unit with multi speed, for milling, cutting and sew mechines
    332  Feed Unit with multi speed, for milling, cutting and sew mechines
    000  Dust Collector - Complete System for woodworking machines
     
  5. Planing (C)
    001  Planner Moulder, Kamro 800 mm
    002  Straight Moulder, Jonsered 500 mm
    333  Feed Units(some different) with multi speed, fit also to milling, cutting and sawing machines
    000  Dust Collector - Complete System for woodworking machines
     
     
  6. Sanding - Polish (D)
    000  Grinding-table with possibility for Suction
    003  Oscillating Vertical Belt Sanding Machine, Bjärnum
    014  Oscillating Vertical Belt Sanding Machine, Bjärnum
    046  Long-belt polish-machine, 2,600 mm
    047  Long-belt polish-machine, 2,600 mm, Johannsen
    048  Polishing machine on floor-stand. Soft roll + Grinding wheel
    049  Wide-belt sanding-machine Castelli, 1.100 mm
    050  Wide-belt sanding-machine, VIMA 900 mm
    079  Grinding machine for drill and steel equipment
    080  Grindstone with engine  
    000  Grinding belt and abrasive paper, in very large selection
    000  Dust Collector - Complete System for woodworking machines
     
  7. Drilling - Piercing (E) 
    013  SemiAutomatic Drillingmachine Stenbergs, with a good selection of Multi-Spindle drillheads
    023  Drilling automat Morbidelli
    024  Centre tap Ayen
    025  Centre tap Bilek Dubelfix
    026  Centre tap Bilek Dubelfix
    027  Knote Hole 4-spindle Drilling Machine WACO, for pole- or wall- montage
    060  Pneumatic Centre tap and Multi Post Drilling machine nr 1, Nottmeier, with several drilling stations and MultiSpindle Heads. Can Drill in any Position and Angle!  Very high Effectiveness for Mass Production.
    060  Pneumatic Centre tap and Multi Post Drilling machine nr 2, Nottmeier, with several drilling stations and MultiSpindle Heads.
    000  Dust Collector - Complete System for woodworking machines  
     
  8. Veneer & Laminate Assembly (F)
    004  Veneering press OTT with feeding through the press
    005  Glue spreader, Carstens, 1.000 mm
    006  Supplementary Table for Montage of Veneer, Laminate, etc
    007  Press form and assembly Veneer details
    008  Press form and assembly Veneer details
    095  Veneer sheets-- It is a very large amount of Veneer from different kind of wood
    096  Veneer sheets-- real huge quantities - only a part is on the pics
     
  9. Gluing - Assembly (F)
    010  Glue triangle, with pneumatic cylinders
    011  Glue triangle, Heavy Duty 2.400 mm with Atlas Copco pneumatic cylinders
    012  Glue wheel with 10 sides, 2.500 x 820 mm
    051  Mitre cut, Morsö 
    052  Strip-machine
    057  Mitre cut, Morsö  
    061  Assembly press
    000  Glue table, standing-gradient apr. 15 degrees
    062  Glue table, lying, large and heavy
    063  Assembly press 
    000  Plug gun, automatic with magazine
    000  Glue pressure barrel
    000  Glue pressure barrel
    000  Glue pump
    000  Edge Gluing Machine
    033  Planing bench, large and heavy 
     
  10. Wood Drying (G)
    000  Control for 2 separately Drying Chambers, computer controlled
    342  Wood Dryer Kiln Flew Fans, system for 2 separately Drying Chambers
    343  Wood Dryer Kiln Humidifying system for 2 separately Drying Chambers
    344  Wood Dryer Kiln heat exchangers, elder model(must be dismounted)
    345  Wood Dryer Kiln, kiln doors(not in delivery, just as example)
    000  Dryer Westwood(dehumidification) for 2 separately Drying Chambers
    067a Wood Dryer Kiln heat exchangers, 2 pcs, elder model(must be dismounted)
    067  Wood-carriage and rail for Drying Chamber and material transportation
    067c Wood-dryer with control for 1 Drying Chamber, elder model(must be dismounted)
    067d Wood Dryer Flew Fan(very large), elder model(must be dismounted)
    000  Aero-temper for electrical heating of drying-chamber
     
  11. Spray Finishing (H) 
    070  Spray Booth with filter and suction  
    071  Spray Booth with wheel and suction
    073  Lacquer sanding(polishing) machine, 900 mm, with 2 grinding shoes and one rotating Brush with vacuum-cleaning.
    075  Lacquer curtain coating machine , 1.550 mm, with feed through and colour recover
    000  Pressure barrel with stirer, Greiff, 30 litre
    000  Pressure barrel , Greiff, 30 litre
    000  Spray gun suction-feeded with paint-cup
    000  Spray gun, Greiff, with tube for pressure feeding
    000  Spray gun, Devilbiss, with tube for pressure feeding with large selection equipment
    309  Spray Drying carriage
    000  Cyclone Dust Collector - Connected to the Spray Boots
     
  12. Drying Room (after Spraying) (H)
    309  Spray Drying carriage
     
  13. Lacquer-Polish (I)
    000  Grinding table with possibility for Suction
    000  Pneumatic Hand Grinders
    000  Dust Collector - Complete System for woodworking machines  
     
  14. Storage - Semimanufactures
    094  Prototypes and semi-manufactures
    000  Different furniture details
    000  Completed Products
     
  15. Store of Tools, Components and Consumer goods (J)
    000  Cutting tools - drills, cutters, etc
    000  Large selection of Saw-blades in HM
    000  Very large selection of cutters, etc
    000  Very large selection of HM-drills, etc
    000  Very large selection of High Speed Steel-drills, etc
    000  Large selection of Knot-drills, etc
    000  Hand tools, spare parts, accessories, consumer supplies, veneer and board material
    000  Abrasive paper for varnish grinding machine
    000  Colour and stain.
    000  Screws in large amount and selection
     
  16. Office - Workshop (K)
    000  Computer unit including software for costs & offer calculation
    000  Computer monitor, large, for CAD-applications - 20 inch
    000  Typewriter for Latin letters
    000  Design Drawings (Blueprints)
     
  17. 17.  Service Center  (N)
    079  Grinding machine for drill and steel equipment
    080  Grindstone with engine
     
  18. Compressed air (O)
    077  Screw compressor Atlas Copco GA 122, complete with large tank
    078  Cool-drying unit with Water separator, Atlas Copco
    076  Big Tank for compressed air
    000  A large number of equipments for compressed air
    000  Compressor Atlas Copco, complete with control system
    000  Large quantity of Pipes for Compressed Air is inkluded
     
  19. Transportation
    307  Mercedes 307D(not org. pic)
    308  Volvo Truck 18 ton(not org. pic)
    000  Material truck, heavy, for for complete discbundles
    000  Material conveyor belt + 2 extra Roller Conveyor(not org. pic)
    000  Roller Conveyor(not org. pic) 
    000  Hand truck 1,200 mm, for standard Eur-pallets, 800 x 1.200 mm.
    000  Hand truck Extra long, ca 2.000 mm, for extra large pallets
    000  Electrically-driven truck / hand stacker
    000  Fork lifter, Pneumatic
    061  Lift table(Scissor lift), high-capacity 3 ton
    000  Stacker
     
  20. Cleaning - Others
    000  Wacuum-cleaner with large Dust Collector, Nilfisk(very large with 3 Motors)